R.C.AVIONICS® Exceeding the Standards ....

R.C. AVIONICS INSTALLATION DEPARTMENT

Completed & Installations in Progress as of Feb. 4, 2012

R.C. Avionics is a full-service avionics shop including sales, installation, repair, and maintenance of avionics for all General Aviation airplanes & rotorcraft.
	To View Previous Installs
		Note: Blue background denotes current installation in progress.

		We Specialize in Light to Heavy Avionics Maintenance.
Tony, Up grading King Air Collins EFIS to WAAS...	Larry, Checking out autopilot install Wiring.	We Specialize in Light to Heavy Avionics Maintenance.
Aero Commander Updating flight guidance and pilots panel	Aero Commander Panel before up grade	Approved Aero Commander Left Panel layout & placcarding.
Tony Getting nose area organized in the Aero Commander	Aero Commander Pilots Panel removed & initial Autopilot wiring.	Aero Commander parcel interior removed for Autopilot wiring.
Approved pedestal panel layout & placcarding.	Original pedestal panel refurbushed.	Aero Commander, Wiring progress hard to measure....
Aero Commander Autopilot Pitch & Trim Servos.	Commander S-Tec Autopilot Roll Servo mounting bracket.	Pilots panel, final "fit" test before paint & screening..
Aspen AHRS sensor..	Pilots panel installed, next populate with flight instruments..	Future Gulfstream Commander Progress..
Beechcraft Bonanza, Panel To be up-dated to electronic glass....	Bonanza Panel as was before the transformation process.....	In the Beginning there was a "6Pack" the process has begun....
Beechcraft Bonanza, Preliminary Floating Panel Layout...	Aspen AHRS (Attitude Heading Reference System) Sensor..	Bonanza Center Stack ..
Beechcraft Bonanza, Stack and stack wiring 80% Complete...	Blank modified late Bonanza (top) to fit early (lower) Bonanza panel...	Checking instrument form and fit Aspen flush mounted..
Color matched and ready for placcard screening.	Pilots Panel Preliminary graphics	Pilots Panel installed
Bonanza post testing and alignment, completed pilots panel.	Parcel Garmin/King stack installed in refurbished mount.	Completed Panel, added recessed aspen, Garmin audio and GNS 530.
Malibu Mirage panel upgrading .....	Mirage pilots panel soon to be Garminized. Left Click for details.	Malibu Mirage Preliminary Rev "A" Pilots panel....
Malibu Mirage New panels required when moving to Garmin Glass .....	Mirage wiring and mounting trays, Click for air frame progress	Let the metamorphose begin, from cyber ware to hardware
Malibu cut panel	Preliminary panel fitting to check dimensional characteristic	Preliminary panel fitting with partial instrumentation installed
EDM 930 Bezel, fabricated to mimic the Garmin.	Proposed Panel Placcarding.	Panel Components EDM 930/Bezel GWD620 and tray mounting brackets
Silk Screening Complete	Wiring 95% complete Final assembly Beginning!	Mirage progress, power up and preliminary checks aheadt....
Mirage Testing & Programing process....	Preliminary testing & programing complete, fine tuning left.	Completed installation....
Malibu, Installation of Garmin G600/GTN750/650	Pilots new panel, Click on picture to see progress to date.	Malibu Rear Avionics Rack.
Malibu, Pilots Panel cut and ready for inspection	Tony, checking harness placement, click for detailed picture.	Malibu, cut pilots panel installed to check clearances.
Malibu pilots panel final clearance check before powder coating.	Malibu, center panel soon to be filled with Garmin & Avidyne .	Malibu, center panel lay out Click for prospective view. .

Malibu Center Stack Right Side Rear Support Brackets	Malibu, center stackl, testing clearances Click for details.	Malibu Center Stack Mounted and & wired.Ready for pre. testing..
Malibu Center Stack Right Side Rear Support Brackets	Malibu Initial power up & Preliminary testing left click for detail photo	Malibu Post flight test. Left click for before/after.

Beechcraft A36 Bonanza Panel Up Grade to Garmin Avionics	Old Avionics to soon to be removed.	Removing old avionics, preparing for Garmin G500/GNT650..

Bonanza N3802P Design of Pilots floating Panel.	Transforming design into reality	N3802P Pilots panel cut out, Garmin 500 PDF.
N3802P Pilots panel prelminary checkout.	N3802P Radio Stack mounted in Beechcraft panel..	N3802P Radio Stack Power coated with rear support shown
N3802P Right side of panel completed.	N3802P Pilots panel Powder Coated & Screened.	3802P AFT Avionics Bay. Left Click for final pilots panel
Piper PA 32RT-300 Aspen, Garmin GTN 750, SL30, GTX 33 Install.	Piper PA 32RT-300 Testing Auto-Dimming
Rnav Star 5000 to be removed, replaced GNS 430 WAAS	Fabracate mount for GNS430 WAAS.
Rnav Star 5000 to be removed, replaced GNS 430 WAAS	Fabracate mount for GNS430 WAAS.	GNS 430 WAAS Mounted under pilots panel.

Cessna 310 Pilots Panel after Upgrade electronic Display.	Cessna 310 panel update.	Rear Audio panel designed & Fabricated by RC Personnel.
Cessna 310 Pilots Panel after Upgrade electronic Display.
Cessna 310, Instrument panel and Garmin G500 upgrade.	Cessna 310 Panel design with placarding	Cessna 310, Instrument panel Garmin G500 PDF (Primary Flight Display)
Cessna 177RG, Instrument panel and Garmin upgrade.	Panel Layout Cessna 177RG, Garmin and JPI Engine Monitoring System.	Completed panel upgrade Click on picture for details.
Bell 206 Helicopter, Comm upgrade to Technisonic	N119SP Rear Audio Control drawing ceiling mounted.	Rear Audio panel mount designed & Fabricated by RC Personnel.
Bell 206 Helicopter, Comm upgrade to Technisonic	N119SP Rear Audio Control drawing ceiling mounted.

N444AA, Strong Rear Support system unitizes stack	Wiring in N444AA Complete and mounting 75% completed.	Larry the lead in the design & installation on N444AA.
Bell 407 Helicopter, Comm upgrade to Technisonic	Panel Before Technisonic upgrade	Tony disassembling interior to access Comm wiring harness.

Piper PA-23 Aztec Before Aspen System Installation.	Piper PA-23 Aspen and 1/2 Stack mounted in panel	Final Installation of Screened/Powder Coated Panel!
Beechcraft C90 Kingair Before Garmin Update	Panel Removal and Wiring	Support System, Engineered & Designed to to utilize original panel mounting system..